Portable Hardness Tester Metal Hardness Tester Leeb Hardness Tester TH130
Advantages
- Large screen(128×64 dot matrix LCD), showing all functions and parameters.
- Test at any angle, even upside down.
- Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
- Seven impact devices are available for special application. Automatically identify the type of impact devices.
- Large capacity memory could store 1000 groups (Relative to average times32～1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
- Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
- Battery information indicates the rest capacity of the battery and the charge status.
- User calibration function.
- USB port with the PC humanity multi-functions data proceeding software.
- Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
- NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
- Auto power off to save energy.
- Excellent after-sale service system for high quality products---two years’ guarantee and all life maintenance. Easy to buy and comfortable to use.
Main Application
- Die cavity of molds
- Bearings and other parts
- Failure analysis of pressure vessel, steam generator and other equipment
- Heavy work piece
- The installed machinery and permanently assembled parts
- Testing surface of a small hollow space
- Material identification in the warehouse of metallic materials
- Rapid testing in large range and multi-measuring areas for large-scale work piece
Technical Specifications
- Measuring range:HLD(170～960)HLD
- Measuring direction:360°
- Hardness Scale:HL,HB,HRB,HRC,HRA,HV,HS
- Display:dot matrix LCD,128×64 dots
- Data memory: 500 groups max.(relative to impact times 32～1)
- Printing paper: width is (57.5±0.5)mm, diameter is 30mm
- Battery pack: 6V NI-MH
- Battery charger: 9V/500mA
- Continuous working period:about 150 hours(With backlight off, no printing)
- Communication interface:USB1.1
- Outline dimensions:212mm×80mm×32mm
Configuration
| | No. | Item | Quantity | Remarks |
| Standard Configuration | 1 | Main Unit | 1 | |
| 2 | D type impact device | 1 | Without cable |
| 3 | Standard test block | 1 | |
| 4 | Cleaning brush (I) | 1 | |
| 5 | Small support ring | 1 | |
| 6 | Battery Charger | 1 | 9V 500mA |
| 7 | Manual | 1 | |
| 8 | DataPro software | 1 | |
| 9 | Communication cable | 1 | |
| 10 | Instrument case | 1 | |
| 11 | Calibration certificate | 1 | |
| Optional accessories | 12 | Cleaning brush (II) | 1 | For use with G type impact device |
| 13 | Other type of impact devices and support rings | | Refer to Table 3 and Table 4 in the appendix. |
Extra function can be added:
OLED screen
Extension cable for different impact device such as C, DL, DC,.
Bluetooth function
Printer
