14x17 Inch Film Viewer NDT Instrument LED Light Source
A. Specification
| Maximum measure | 7,000-140,000cd/m2 |
| Light source | LED |
| Observable blackness | 2.9-4.25D |
| Way to dimming | Switch or foot-switch |
| Screen | 1/4, 1/2, full |
| Light source lifetime | ≥100,000 hrs |
| Color temperature | ≥9000K |
| Screen size | 430×350mm |
| Uniformity coefficient | ≥90% |
| Surface temperature within 12 hours | ≤40℃ |
| Cooling system | Aluminum plate heat dissipation |
| Power | 200W |
| Weight | 5kg |
B. Optical Specification
- No flicker on the surface of the observation screen, screen center brightness is about 55,000cd/m2.
- The screen can be devided into 1/4, 1/2 and full screen, which controlled by side switch.
- Observe the scattering coefficient of light on the screen is over 0.6.
- Observation of various parts of the screen illumination, the uniformity coefficient is over 0.7.
- Observation light can be lit up within 10s, brightness stability time is less than15 minutes.
- Observation light noise when working is lower than 40dB.
- Observation lamp work 1h, the front surface of the screen temperature is less than 60℃.
- High-frequency voltage regulator operating frequency 30kHz ~ 100kHz.
- Power supply voltage DC12X (1±5%) V; power consumption ≤ 350W.
C. Installations
Open the package, put the film viewer on the desk, plug in the power.
D. Step to use
- Plug in the power
- Open the rear of the film dryer power switch, the screen turns on, and in 15 minutes the screen will reach to normal brightness.
- Security protection:automatically turns off after 10 minutes
E. Precautions
- You have to use original power adapter, the power plug must have a good grounding, and otherwise it will cause troubles. If you use other power adapter, it will cause damage to the product. If the product is overheating, unplug the power adapter.
- This product's warranty is one year, please do not open to repair, otherwise it will cause damage.
- Do not use this product in a humid place (such as a bathroom), otherwise it will be damaged by electric shock.
- Do not use this product outdoors in a minefield, otherwise it is vulnerable to electric shock.
- Do not use this product near fire, or impact or shake the product.
- When not in use for a long time, please unplug the power plug and the regulator plug.
- If you unplug while using, the screen will still have fade brightness, it’s normal.
